If you are trying to get your model to look
more scale, than this is one area you should not over look. I built my mount before
I put much thought into detailing it. First, the windows on the front. They
should be clear windows and not painted. Don't make my mistake. Here is a
picture of the mount built "straight" from the box. I will use it as my
starting point.
(Click on image to enlarge)
There is a error in the shape of the side of the turret. Take a look at the
drawing below.
Here is the correct shape of the turret. I
built up the angle by using scrap wood.
I placed only one set of double doors on my
turret. I now feel that this is not correct. I am thinking there should have
been two sets of double doors. |
|
I drilled out the wood dowel so I could add a gunner. This
is easily done and add to the overall appearance of the turret.
(Click on image to enlarge)
I drilled out the main barrel and added supports to the dish.
The dark gray on the top is the same "non-skid" color I used for the
weather decks. |