Pics from Darby |
Pics from Darby |
Oct 22 2006, 12:13 PM
Post
#1
|
|
Seaman Apprentice Group: Members Posts: 8 Joined: 28-August 06 From: Gernany, Berlin Member No.: 8 |
Hello Roger
I begin the coming winter with my Darby. I don't get any Pittman engines here in Europe there, I use Bühler engines with 3000 RPM to , 12 V and 15 Ncm torque, . I hope this is lower not got motorized thus my Darby helped me very much to have ?? !! your photos . for thanks for this you have set her into the web. |
|
|
Oct 27 2006, 10:28 PM
Post
#2
|
|
Administrator Group: Root Admin Posts: 330 Joined: 17-August 06 From: Minot, North Dakota Member No.: 1 |
Hello Roger I begin the coming winter with my Darby. I don't get any Pittman engines here in Europe there, I use Bühler engines with 3000 RPM to , 12 V and 15 Ncm torque, . I hope this is lower not got motorized thus my Darby helped me very much to have ?? !! your photos . for thanks for this you have set her into the web. What is the gear ratio of the motors you are using? You sould be able to order whatever you need from Harbor Models!!! They can set you up with some Pittman 3700 motors. You run these direct drive! Thanks for the comment about the web, hope what we are doing helps others. -------------------- |
|
|
Nov 30 2006, 11:26 AM
Post
#3
|
|
Seaman Apprentice Group: Members Posts: 8 Joined: 28-August 06 From: Gernany, Berlin Member No.: 8 |
Hello
(the engines have a very great torque for !!, they will therefore run without transmissions the 70 mm of propeller (4 sheet) run in Kortdüsen !! similar as the "Pono-Kortnozle") Greeting from Berlin (Germany) |
|
|
Lo-Fi Version | Time is now: 29th April 2024 - 12:27 PM |