MISTER DARBY, I have started another Mister Darby |
MISTER DARBY, I have started another Mister Darby |
Sep 8 2006, 04:54 PM
Post
#1
|
|
Administrator Group: Root Admin Posts: 330 Joined: 17-August 06 From: Minot, North Dakota Member No.: 1 |
For the past week I have been looking over the carcass of my previous Mister Darby project. A couple of years ago the Mister Darby was damaged (dropped) when I moved to another house. This Mister Darby has been in storage over two years. Now after looking at the plans and thinking of the problems I ran into during assembly, I think I will take a different path on my next Mister Darby. The picture below shows some of the damage to my first Mister Darby. The damage is far more severe than it looks in the picture below. NOTE the masking tape holding the decks together. I am embarrassed to even post this picture!
One of the features I will have on my new Darby is the use of the Harbor Models Power Distribution Panel. I located it under the wenches. In order to do this, I had to make the wench house roof removable. Then I mounted the wenches on a hatch and then mounted the power distribution panel on a bracket that supported it. I do plan to change the bracket design and add ventilation holes on the bottom of the bracket. The pictures below were taken BEFORE my Mister Darby was damaged. I also plan NOT to use the switches that were mounted on the outside on the post side. (You can see these switches through the stairwell on the port side in the picture) More updates soon. -------------------- |
|
|
Lo-Fi Version | Time is now: 29th April 2024 - 05:24 AM |