Printable version of Entry

Click here to view this entry in its original format

rktman56's Projects

USS Spruance Superstructure

Well, here is some pictures of the work I was doing on the superstructure.

IPB Image
The picture above shows the filler added after the styrene was applied. After the primer is applied and sanded I will have a great surface for paint. If you look close to the end of the stack house you can see some "fuze" still on the basswood. After this is sanded these will be covered with styrene also.

IPB Image
Another view. Walkways and other details will be added later.

IPB Image
Cutout made for the starboard forward RAS cutout. The fitting is from SIRMAR.

IPB Image
The plastic parts in this picture look "warped" but they are NOT. This is a bad picture and I need to post a new one later. wink.gif

I have not been spending much time at all working on my model ships. What time I do have is going to a R/C Cessna 182 Skylane I am working on! blink.gif


Powered by IP.Blog (http://www.invisionblog.com)
© Invision Power Services (http://www.invisionpower.com)