Well, here is some pictures of the work I was doing on the superstructure.
The picture above shows the filler added after the styrene was applied. After the primer is applied and sanded I will have a great surface for paint. If you look close to the end of the stack house you can see some "fuze" still on the basswood. After this is sanded these will be covered with styrene also.
Another view. Walkways and other details will be added later.
Cutout made for the starboard forward RAS cutout. The fitting is from SIRMAR.
The plastic parts in this picture look "warped" but they are NOT. This is a bad picture and I need to post a new one later.
I have not been spending much time at all working on my model ships. What time I do have is going to a R/C Cessna 182 Skylane I am working on!
Powered by IP.Blog (http://www.invisionblog.com)
© Invision Power Services (http://www.invisionpower.com)