It's been awhile since my last post. Over the past week I have been working on the superstructure for the USS Spruance. I have moved on to building the forward section.
Here I am starting to frame up the starboard side. (Note where the RAS cut out goes)
Glued and clamped.
More progress... (I think)
Here I am starting to layout the forward section. There are a few tricky angles on the forward section. The plans were a help although my hull didn't match plans. Because of this, I had to make changes to allow the forward section to match my hull. Also note where I made allowance for the thickness of the wood in my measurements.
More posts soon
Powered by IP.Blog (http://www.invisionblog.com)
© Invision Power Services (http://www.invisionpower.com)