banner.jpg (8927 bytes)
Button Spacer
PG 88
Button Spacer
Kit Review
Button Spacer
Step By Step
Button Spacer
Extras
Button Spacer
Gallery
Button Spacer
Links
Button Spacer
  Last update: 23 Sep 07
steps_banner.jpg (8224 bytes)

Backmove.gif (1900 bytes)Ahead

step.gif (1063 bytes)two.gif (881 bytes)nine.gif (905 bytes)

Cement C-5 and C-6 in place.



step.gif (1063 bytes)three.gif (894 bytes)zero.gif (896 bytes)

Cement the lower cabin top halves in place.



step.gif (1063 bytes)three.gif (894 bytes)one.gif (859 bytes)

Cement the 1/32 ply cabin front in place. Cement B-1 in place.

 

step.gif (1063 bytes)three.gif (894 bytes)two.gif (889 bytes)

Cement Cement B-1 in place.  When dry remove the cabin from the hull and place on your bench.

inv_spacer.gif (807 bytes)

 inv_spacer.gif (807 bytes)

26_1.gif (12291 bytes)

Roger's Notes: This shows you the completed frames inside the cabin.

33.gif (20796 bytes)

step.gif (1063 bytes)three.gif (894 bytes)three.gif (894 bytes)

Cement the side windows to the cabin.

 step.gif (1063 bytes)three.gif (894 bytes)four.gif (876 bytes)

Cement the windscreen in place.

Roger's Notes: Before I glued the windscreen in place, I painted the interior a dark grey.  When you glue these parts together take your time and they will line up very nicely.

inv_spacer.gif (807 bytes)
Home The Model Boat Marina Contact Me Discussion Group

Model Marina Web Site © Copyright 2007 RKTMAN  All rights reserved.
Web site Designed & Maintained By RKTMAN
Dumas Logo and materials Copyright Dumas Products, Inc. - Used with permission.