The superstructure is built up on the boat rather than on the building board. Refer to figs. 3, 4, 5, 6, on the plan for construction drawings. Lay the lower cabin side on the bench then place the upper cabin side in position and mark the lower cabin side where C-2 should be located. 

Roger's Notes: The front edge of the upper cabin side extends 1/8" forward of the rear edges of the bridge area of the lower cabin side, in order to cement to the inside of the "U" cut out in C-1.

Roger's Notes: Locate the parts that will be used to construction of the superstructure. 




Roger's Notes: Test fit the parts before you attempt to use glue.