For
the crest on the side wall of 01 level I used this crest. I printed it out, cut t
out and used rubber cement to attach it to the model. This was a temporary thing
that I have not changed in about a year. Although it sounds lewd to add something of
this cheap nature to the ship but the visual impact is stunning.
For you who want to do it right, I would suggest you print the
crest on clear or white blank decal material. After this, dust it lightly with
several clear coats to protect the ink. Make sure you do this BEFORE
you submerge the decal in water or the ink will run.
Here is the USS Crockett patch.
(Click on image to enlarge)
