Button Spacer
bunkerb1.jpg (2100 bytes)
Button Spacer
Kit Review

Extras
Button SpacerStep by StepButton Spacer
Gallery
Button Spacer
Links
Button Spacer



  Last update: 07 Feb 08

steps_banner.jpg (8224 bytes)
Backmove.gif (1900 bytes)Ahead

The Superstructure:
Aft Superstructure:

inv_spacer.gif (807 bytes)

  The wall continues past the upper deck, so Homeport Model Ships has left a notch out of the deck to fit this wall. Make sure you use the angled extra parts to align the angle.  See (A) below:

inv_spacer.gif (807 bytes)
inv_spacer.gif (807 bytes)

There is a platform in the Port boat area that sticks into the bulkhead.  the floor section to the edge of the bottom of the cut. See (B) below:

inv_spacer.gif (807 bytes)

 
inv_spacer.gif (807 bytes)

inv_spacer.gif (807 bytes)

  Now locate the needed parts.
inv_spacer.gif (807 bytes)
 

  
inv_spacer.gif (807 bytes)

Model Marina Web Site Copyright 2008 RKTMAN  All rights reserved.
Web site Designed & Maintained By RKTMAN

HomePort Model Ships
Logo and materials Copyright HomePort Model Ships. - Used with permission.
Site Header Copyright SPUTNIKK.COM - Used with permission.