Getting Started:

  When you get your kit, open the box and take time to get familiar with the items contained within the box.  The kit includes an well written in-depth construction manual, full size plans,  high quality wood and some fittings. 

Materials You Will Need:

  You will need the fallowing items to build this kit. Most of them are available from your local hobby dealer:         

Fast-drying and Slow-drying Cyanoacrylate Adhesive plus Accelerator.
16 oz. of Slow Drying Epoxy or Polyester Resin.
Rubbing Alcohol
Light Machine Oil
Aerosol can of Lacquer based
Automotive Primer (1 can)
2 oz. Automotive Grease or Vaseline
Wood Filler
Stiff Paper
Carbon Paper
Several Solder Brushes
Light String
Plastic Wrap
1/8" Striping Tape

Tools you Will Need:

Quarter-inch Electric Drill  and 1/16", 3/32", 1/8", 5/32" and 1/4" Drill Bitts.
Push Pins
T-Pins
X-Acto· Knife and extra blades.
Sandpaper:
#80 and #220 Grit Aluminum Oxide
#320, #400, #600 WetDry
Sanding Block
12" & 36" Steel Straight Edges
8. Small Square
Razor Saw
Pencil
Scissors
Small Wood Plane
Assorted Screwdrivers
Needle Node Pliers w/cutting jaws
Small Flat File
Soldering Iron and Rosen-Core Solder
Building Board